Categories
HH1110-3S10A10-LD5 SFP Media Converter »

HH1110-3S10A10-LD5 SFP Media Converter     The HH1110-3S10A10-LD5 is an Ethernet media converter that converts media transmission between UTP Copper cablings and fiber SFP (Small Form-Factor Pluggable) Transceivers. The HH1110-3S10A10-LD5 copper-to-fiber module is available in 10/100Mbps Fast Ethernet and 1000 Mbps Gigabit Ethernet types, allowing seamless integration between Fast/Gigabit Ethernet networks using unshielded twisted pair (UTP) copper cabling, and Gigabit fiber networks.

-  Conversion between different transmission speeds and media types

-  Standalone and compact hardware design

-  Auto-negotiating Ethernet port (Speed and Half/Full Duplex)

-  Auto-crossover Ethernet port (Supports Auto MDI/MDI-X)

-  Standard open Fiber slots for SFP Transceiver

-  Built-in Link Loss Forwarding Technology

-  Easy Installation, Easy Troubleshooting

-  Long-haul Gigabit Ethernet

Specification

Standard Compliance  

·IEEE802.3 10BASE-T

·IEEE802.3u 100BASE-TX

·IEEE 802.3ab 1000Base-T

·IEEE 802.3z 1000Base-SX/LX standards

·IEEE802.3x Flow Control and Back pressure

Connector and Interface        

·Fiber: SFP 3.3V
·RJ-45 Socket: CAT-5 (10/100/1000Mbps) Twisted Pair cable Auto MDI/MDI-X and Auto-  Negotiation Function Support

Link Loose Forward    

·TX to Fiber: If TX port link is broken, then converter will force the fiber to link down.

·Fiber to TX: If Fiber port link is broken, the media converter will force the TX port to link down.

DIP Switch     

·DIP Switch 1: Fiber Auto-Negotiation/1000Mbps Full Duplex mode

·DIP Switch 2: TX to Fiber LLF (Link Lose Forwarding) Disable/Enable

·DIP Switch 3: Fiber to TX LLF (Link Lose Forwarding) Disable/Enable

 

LED Indication

·TX, 100M, RX, FEF, 1000M, PWR

Power      

·Standalone (external adapter): DC 5V / 1A

Dimension      

·120 (L) x 92 (W) x 26(H) mm, power external

Operation Environment   

·Operating temperature: 0°C ~ 70°C

·Storage temperature: - 40°C~ 85°C

·Operating humidity: 10% ~ 90%, non-condensing

Safety

·UL CE and FCC

ORDERING INFORMATION:

MODLE NAME

SPEED
Mbps

FIBER

WAVELENGTH
nm

DISTANCE
Km

CONNECTOR POWER
HH1110-8M05A10-LD5 10/100/1000 DF&MM 850 0.55 LC EXTERNAL DC5V 1A
HH1110-3S10A20-LD5 10/100/1000 DF&SM 1310 10-30 LC INTERALAC220V/DC-48V
HH1110-5S50A10-LD5 10/100/1000 DF&SM 1550 50-100 LC EXTERNALDC5V 1A
HH1110-3S10B10-LD5 10/100/1000 SF&SM 1310/1550 10-20 SC/LC EXTERNALDC5V 1A
HH1110-5S10B10-LD5 10/100/1000 SF&SM 1310/1550 10-20 SC/LC EXTERNALDC5V 1A

ACCESSORIES INFORMATIONS:

MODLE NAME RECEIVER SENSITIVITY

WAVELENGTH

CONNECTOR

DISTANCE

SUPPLY VOLTAGE MAX CURRENT
FHM-D1208L33 -17 dBm 850 nm LC 0.55 Km 3.15-3.45V 300mA
FHM-D1203L33 -20 dBm 1310 nm LC 10-30 Km 3.15-3.45V 300mA
FHM-D1203L33 -23 dBm 1310 nm LC 50-100 Km 3.15-3.45V 300mA
FHM-D1205L33 -24 dBm 1550 nm LC 10-20 Km 3.15-3.45V 300mA
FHM-S1203L33 -20 dBm 1310 nm SC 10-20 Km 3.15-3.45V 300mA
FHM-S1205L33 -20 dBm 1550 nm SC 10-20 Km 3.15-3.45V 300mA